How To Connect DJ Needles and DJing Cartridges

Here’s a simple, straightforward explanation on how to set up your needles and cartridges for best use when DJing.

Source: idjondemand

---

This is simple. Follow the manufacturer’s instructions on connecting your needles and adjusting the tone arm, anti-skate and height adjustment. They usually come with different settings according to application. I bought the Shure M44-7 and the directions were very easy to follow. It told me step by step on how to set up the tone arm for playing back records only. Because I sample a lot I did not need to use the Battle DJ settings.

So if you are going to be doing tricks there is one setting and if you’re not there is another setting. Instructions come with the needles when you buy them. If not let me know and I’ll find out for you. Click on the “Contact Me” link from the menu below.

DJ Tutorial Tip: Remember to take into consideration what type of DJing you will be doing. There are different needles for different types of DJing but all needles and cartridges fit turntable tone arms.

Some needles come mounted on a head shell while with others you have to mount the needle to the head shell then connect the head shell to the tone arm. Other needles are built on one platform so all you have to do is connect it to the tone arm.

DJ Tutorial Tip: Follow the manufacturers instructions and you should do fine.

Done with setting up?

Move onto bigger and better things with this resource for advanced DJing Tips and Techniques

or

• Go to the next Setup step: Setting Up Other DJing Equipment
  
• Go back to :  Setting Up Your DJ Gear
• Back to DJ Equipment Tutorial Index